A study of the intermolecular interactions of lipid components from analogue fingerprint residues

A compositionally simplified analogue of a latent fingermark was created by combining single representatives of each major component of a natural fingermark. Further modified analogues were also produced each having one component removed. The aim of this study was to investigate the intermolecular interactions that occurred within these analogue samples using Fourier Transform Infrared (FT-IR) Microspectroscopy. FT-IR microspectroscopy showed that the absence of squalene and cholesterol significantly restricted the interactions between the other organic constituents within the analogue samples. Investigating the intermolecular interactions of organic compounds within a simplified analogue solution could indicate corresponding interactions that occur within natural fingermarks. These potential interactions could go on to be the target of further investigation of latent fingermark chemistry, and ultimately contribute to a better understanding of the aging processes and degradation mechanisms that take place post-deposition.     

应用丽蝇蛹壳脂类推断死亡时间的基础研究

目的探讨丽蝇科大头金蝇蛹壳风化过程中脂质降解特征对死亡时间推断的应用价值。方法收集饲养的大头金蝇蛹壳,置于户外5d、10d后收回,-20℃保存,对照组清洗后直接冻存。样本行显微傅里叶变换红外光谱(micro-FTIR)检测,预处理后读取峰位、峰高,应用SPSS 19.0进行统计学分析。结果与对照组相比,5d和10d组脂质VasCH_3峰位变化无统计学意义,VasCH_2峰位蓝移,VsCH_2吸收峰消失,仅10d组VsCH_3峰位红移,除5d组VsCH_3外,各吸收峰强度均降低;与5d组相比,10d组所有吸收峰强度均降低,VsCH_3峰位红移,其余各吸收峰的峰位变化均无统计学意义。结论应用micro-FTIR技术检测大头金蝇蛹壳风化过程中脂质的降解特征为法医学死亡时间推断提供新思路,具有一定的应用潜力。     

TOF‐SIMS Analysis of Red Color Inks of Writing and Printing Tools on Questioned Documents

Time‐of‐flight secondary ion mass spectrometry (TOF‐SIMS) is a well‐established surface technique that provides both elemental and molecular information from several monolayers of a sample surface while also allowing depth profiling or image mapping to be performed. Static TOF‐SIMS with improved performances has expanded the application of TOF‐SIMS to the study of a variety of organic, polymeric, biological, archaeological, and forensic materials. In forensic investigation, the use of a minimal sample for the analysis is preferable. Although the TOF‐SIMS technique is destructive, the probing beams have microsized diameters so that only small portion of the questioned sample is necessary for the analysis, leaving the rest available for other analyses. In this study, TOF‐SIMS and attenuated total reflectance Fourier transform infrared (ATR‐FTIR) were applied to the analysis of several different pen inks, red sealing inks, and printed patterns on paper. The overlapping areas of ballpoint pen writing, red seal stamping, and laser printing in a document were investigated to identify the sequence of recording. The sequence relations for various cases were determined from the TOF‐SIMS mapping image and the depth profile. TOF‐SIMS images were also used to investigate numbers or characters altered with two different red pens. TOF‐SIMS was successfully used to determine the sequence of intersecting lines and the forged numbers on the paper.     

FTIR图像—单点模式法无损鉴别不同品牌激光打印机墨粉色痕

利用傅里叶红外图像系统,采用单点模式对收集到的八种品牌激光打印机墨粉色痕进行红外扫描,采集样品红外光谱,并对其中两种样品红外光谱进行二阶导数运算,得到对应的二阶导数光谱。实验表明,该方法可有效区分不同品牌激光打印机墨粉色痕,并可为其他书写材料无损检验鉴定提供借鉴。     

Forensic analysis of bicomponent fibers using infrared chemical imaging

The application of infrared chemical imaging to the analysis of bicomponent fibers was evaluated. Eleven nominally bicomponent fibers were examined either side-on or in cross-section. In six of the 11 samples, infrared chemical imaging was able to spatially resolve two spectroscopically distinct regions when the fibers were examined side-on. As well as yielding characteristic infrared spectra of each component, the technique also provided images that clearly illustrated the side-by-side configuration of these components in the fiber. In one case it was possible to prepare and image a cross-section of the fiber, but in general the preparation of fiber cross-sections proved very difficult. In five of the 11 samples, the infrared spectra could be used to identify the overall chemical composition of the fibers, according to a published classification scheme, but the fiber components could not be spatially resolved. Difficulties that are inherent to conventional "single-point" infrared spectroscopy, such as interference fringing and sloping baselines, particularly when analyzing acrylic type fibers, were also encountered in the infrared chemical image analysis of bicomponent fibers. A number of infrared sampling techniques were investigated to overcome these problems, and recommendations for the best sampling technique are given. Chemical imaging results were compared with those obtained using conventional fiber microscopy techniques.     

3,4-亚甲二氧基甲卡西酮的鉴定

目的 建立基于傅里叶变换红外光谱(FTIR)、气相色谱-质谱(GC-MS)结合高分辨质谱技术联合鉴定未知样品的方法.方法 未知样品采用红外专用取样器直接检测;甲醇溶解后采用GC-MS和组合型高分辨质谱检测,以MDMA为内标物.结果 未知样品获得的红外光谱特征吸收峰为1679(C=O键),1603,1502,1453,1423,1259,1121,1090,1035,930,887,838,768,742和717cm-1,质谱特征碎片峰(m/z)为58.1,91.0,120.9,149.0和207.0,测得的精确质量数[M+H]+为208.0966.经信息分析未知样品鉴定为3,4-亚甲二氧基甲卡西酮,该物质属于新型化学合成卡西酮类精神活性物质,已经列入部分欧盟国家的管制药物目录.结论 本方法可用于3,4-亚甲二氧基甲卡西酮的鉴定.     

基于红外光谱无损区分可擦中性笔墨水色痕的研究

可擦中性笔墨水色痕形成文件的检验是目前法庭经常遇到的问题,建立一种简便、灵敏、快速、定性准确的区分可擦中性笔墨水色痕种类的方法是当前公安实战部门所需要的。研究中利用红外显微镜,采用单点模直接采集可擦中性笔墨水色痕的红外光谱。实验结果表明,根据样品红外吸收光表征的红外吸收峰的位置、数目、强度及形状可将不同品牌的可擦中性笔墨水色痕区分开来。     

非侵入红外分光成像检测潜指纹

利用傅立叶红外分光成像（FTIR）在保留痕迹证据的同时，又能呈现详细的未处理潜指纹。潜指纹在感光底片上冲洗出来，使用数据处理法从背景材料提取潜指纹的脊模版，包括红外分光谱带强度测量、主要成分分析（（PCA）、次谱带强度计算及这几种方法的综合运用。指纹的痕迹证据还可被恢复和鉴定。     

Characterization of Printing Inks Using DART‐Q‐TOF‐MS and Attenuated Total Reflectance (ATR) FTIR

The rise in improved and widely accessible printing technology has resulted in an interest to develop rapid and minimally destructive chemical analytical techniques that can characterize printing inks for forensic document analysis. Chemical characterization of printing inks allows for both discrimination of inks originating from different sources and the association of inks originating from the same source. Direct analysis in real‐time mass spectrometry (DART‐MS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) were used in tandem to analyze four different classes of printing inks: inkjets, toners, offset, and intaglio. A total of 319 samples or ~ 80 samples from each class were analyzed directly on a paper substrate using the two methods. DART‐MS was found to characterize the semi‐volatile polymeric vehicle components, while ATR‐FTIR provided chemical information associated with the bulk components of these inks. Complimentary data results in improved discrimination when both techniques are used in succession resulting in >96% discrimination for all toners, 95% for all inkjets, >92% for all offset, and >54% for all intaglio inks.     

Analytical Characterization of Erythritol Tetranitrate,an Improvised Explosive

Erythritol tetranitrate (ETN), an ester of nitric acid and erythritol, is a solid crystalline explosive with high explosive performance. Although it has never been used in any industrial or military application, it has become one of the most prepared and misused improvise explosives. In this study, several analytical techniques were explored to facilitate analysis in forensic laboratories. FTIR and Raman spectrometry measurements expand existing data and bring more detailed assignment of bands through the parallel study of erythritol [¹⁵N₄] tetranitrate. In the case of powder diffraction, recently published data were verified, and ¹H, ¹³C, and ¹⁵N NMR spectra are discussed in detail. The technique of electrospray ionization tandem mass spectrometry was successfully used for the analysis of ETN. Described methods allow fast, versatile, and reliable detection or analysis of samples containing erythritol tetranitrate in forensic laboratories.